Ghostbuster’s Slime Blower Build #1

Ghostbusters Slime Blower Build #1

Like I mentioned previously, Im finally continuing the Ghostbusters Slime Blower project that i shelved two years ago. While I said that i will use foam as main construction , I changed my mind and decided to build it mainly with 3D printed parts except for the tanks and blower tubes. I will be using foam for the tubes and glue them to 3d printed dome top/bottom. Majority of the parts will be 3d printed and most likely some fittings will be cast resin.

All the parts are 3D modeled with 123D.
Blower nose and nozzle : Left , 3d printed and Right, foam
Nose and nozzle assembly
Tanks top dome and handle

Leave a Reply

%d bloggers like this: