Star Wars Pre Vizsla Darksaber A year ago , i made the acrylic blade for Pre Vizsla darksaber. I never did finished the hilt. Now , I 3D modeled a new hilt for the blade. The hilt can hold the blade, a 5degree lens, Luxeon Rebel 20mm LED , 2watt […]
Ghostbusters Slime Blower Build #1 Like I mentioned previously, Im finally continuing the Ghostbusters Slime Blower project that i shelved two years ago. While I said that i will use foam as main construction , I changed my mind and decided to build it mainly with 3D printed parts except […]
Smoke Machine Tube Test I had someone asked what if they can attach tube to the smoke machine. The answer is YES, I can. In this picture, i used a 10mm outside diameter tube with 6mm inside diameter. As you can see, it still works. The tube is 1.2meter long.
Helmet As you can see on the right, the helmet is 3d printed. The helmet was intended to be molded but I’m having a problem getting silicone rubber and casting resin. Most likely i will reprint the helmet again with thinner wall and the vent outlets modeled into it. Smoke […]