This listing is for a digital file for making your own MSE-6 or Mouse Droid from Star Wars.
This template includes a PDF template for the shell . Print the PDF in A3 paper at 100%. Included 3D models are 14pin and 16pin IC chips , bottom bumper, heatsink. Also included for the Side board template in PDF. Print this in A4 paper at 100%. I used a laser cutter to cut the side board but you can use a dremal to cut and drill the holes for the IC chip holder.
Files included (FREE)
- Shell template (PDF A3)
- Sideboard template (PDF A4)
- 14 pin IC chip 3d model (STL)
- 16 pin IC chip 3d model (STL)
- Bottom bumper 3d model (STL)
- Side board heatsink 3d model (STL)
Template + Printed parts : If you do not have a 3d printer or a laser cutter , I can print those files and lasercut 2pc of acrylic for the side board. Below is the list you will received
- 14 pin IC chip x 88pcs
- 16 pin IC chip x 11pcs
- Bottom Bumper x 2pcs
- Sideboard Heatsink x 4pcs
- 2mm lasercut acrylic side board x 2pcs
- All the digital files listed above
The purchase of the file are for an individual use purpose only. You can share this file around for free but please respect out policy to not sell or reproduce my files. Do not duplicate, mass produce or any other commercial means from this file. Thank you and have fun.